Contact us or visit us
C. Albaricoque, s/n
30500. Molina de Segura
Murcia. Spain.
P. (+34) 968 389 088
info@penalver.comGet more information
Contact us or visit us
C. Albaricoque, s/n
30500. Molina de Segura
Murcia. Spain.
P. (+34) 968 389 088
info@penalver.comGet more information
Model MRC1200
Our post repair system (just like our compound liners) has been updated and perfected for more than 30 years to get what we have today, a technologically advanced and safe machine that is present in the production lines of the leading manufacturers of metal cans.
Our post repair system (just like our compound liners ) has been updated and perfected for more than 30 years to get what we have today, a technologically advanced and safe machine that is present in the production lines of the leading manufacturers of metal cans.
600 ends per minute on a single lane.
For round E.O.E. between 52.5 mm (202) and 99 mm (401) in diameter.
We have other sizes and additional applications on petition.
Provides the time and temperature necessary for the lacquer cross-link.
Before the exit, a cooling chamber reduces the temperature of outbound ends to facilitate their subsequent handling.
They work in depression to ensure that the air flow is correct and never accumulate gases.
It heats the air from 60 to 200 ºC by means of a gas burner or electric heaters.
A concentric rotating head, with two pneumatic guns, applies the lacquer in a single go.
Feed and position the ends on the conveyor chain using a feeding knife.
The brass pockets, resistant to friction and high temperatures, drive the lids inside the oven from the lacquer station to the exit.
600 ends per minute
on a single lane.
Control Panel
Touch panel to have total control of the machine.
Vertical oven
Provides the time and temperature necessary for the lacquer cross-link.
Before the exit, a cooling chamber reduces the temperature of outbound ends to facilitate their subsequent handling.
Ventilation turbines
They work in depression to ensure that the air flow is correct and never accumulate gases.
Hot air generator
It heats the air from 60 to 200 ºC by means of a gas burner or electric heaters.
Lacquering station
A concentric rotating head, with two pneumatic guns, applies the lacquer in a single go.
Feeding System
Feed and position the ends on the conveyor chain using a feeding knife.
Brass pocket chain
The brass pockets, resistant to friction and high temperatures, drive the lids inside the oven from the lacquer station to the exit.
For round E.O.E. between 52.5 mm (202) and 99 mm (401) in diameter.
We have other sizes and additional applications on petition.
Combined production of up to 1.200 ends per minute.
Two independent lanes that allow working with speed and different formats of round ends.It allows the use of only one lane while the other is stopped.
They work in depression to ensure that the air flow is correct and never accumulate gases.
Provides the necessary time and temperature for the lacquer cross-link.
Before the exit, a cooling chamber reduces the temperature of outbound ends to facilitate their subsequent handling.
It heats the air from 60 to 200 ºC by means of a gas burner or electric heaters.
Two concentric heads, with four pneumatic guns, apply the lacquering in one go.
Feed and position the ends on the conveyor chain using a feeding knife.
Touch panel to have total control of the machine.
The brass pockets, resistant to friction and high temperatures, drive the lids inside the oven from the lacquer station to the exit.
Combined production of
up to 1.200 ends per minute.
Feeding System
Feed and position the ends on the conveyor chain using a feeding knife.
Lacquering station
Two concentric heads, with four pneumatic guns, apply the lacquering in one go.
Vertical Oven
Provides the necessary time and temperature for the lacquer cross-link.
Before the exit, a cooling chamber reduces the temperature of outbound ends to facilitate their subsequent handling.
Hot air generator
It heats the air from 60 to 200 ºC by means of a gas burner or electric heaters.
Ventilation turbines
They work in depression to ensure that the air flow is correct and never accumulate gases.
Control Panel
Touch panel to have total control of the machine.
Brass pocket chain
The brass pockets, resistant to friction and high temperatures, drive the lids inside the oven from the lacquer station to the exit.
Two independent lanes that allow working with speed and different formats of round ends.
It allows the use of only one lane while the other is stopped.
Lacquering without format limitations.
Reaches up to 600 ends per minute in round format and 400 ends per minute in the other formats.
It adapts exactly to the geometry of the end.
They work in depression to ensure that the air flow is correct and never accumulate gases.
Provides the time and temperature necessary for the lacquer cross-link.
Before the exit, a cooling chamber reduces the temperature of outbound ends to facilitate their subsequent handling.
It heats the air from 60 to 200 ºC by means of a gas burner or electric heaters.
An adaptable head between round or shape ends with two pneumatic guns, applies the lacquer in a single go
Later, two pneumatic guns are responsible for applying lacquer to the rivet of the ring.
Feed and position the ends on the conveyor chain using a feeding knife.
Touch panel to have total control of the machine.
The brass pockets, resistant to friction and high temperatures, drive the lids inside the oven from the lacquer station to the exit.
Lacquering without format limitations.
Feeding System
Feed and position the ends on the conveyor chain using a feeding knife.
Lacquering station
An adaptable head between round or shape ends with two pneumatic guns, applies the lacquer in a single go.
Later, two pneumatic guns are responsible for applying lacquer to the rivet of the ring.
Vertical Oven
Provides the time and temperature necessary for the lacquer cross-link.
Before the exit, a cooling chamber reduces the temperature of outbound ends to facilitate their subsequent handling.
Hot air generator
It heats the air from 60 to 200 ºC by means of a gas burner or electric heaters.
Ventilation turbines
They work in depression to ensure that the air flow is correct and never accumulate gases.
Control Panel
Touch panel to have total control of the machine.
Brass pocket chain
The brass pockets, resistant to friction and high temperatures, drive the lids inside the oven from the lacquer station to the exit.
Reaches up to 600 ends per minute in round format and 400 ends per minute in the other formats.
It adapts exactly to the geometry of the end.
End type
Round End
52.5 mm (202) to 99 mm (401)
52.5 mm (202) to 99 mm (401)
52.5 mm (202) to 99 mm (401)
Shape end
-
-
1/4 club, 1/4 oval o equivalents
Working speed
Minimum
100 e.p.m
200 e.p.m
100 e.p.m
Maximum
Up to 600 e.p.m
Up to 1200 e.p.m
Up to 600 e.p.m
Dimensions
Height
4592 mm
4592 mm
4592 mm
Length
2302 mm
2302 mm
2302 mm
Width
1848 mm
2098 mm
1848 mm
Weight
2670 kg
3750 kg
2670 kg
Pneumatic gun
Number of guns
2
4
2 (+ 2 optional rivet)
Hydraulic pressure
Up to 20 bar
Up to 20 bar
Up to 20 bar
Oven (100 e.p.m. | 600 e.p.m.)
Total time
8 m 24 s | 1 m 40 s
8 m 24 s | 1 m 40 s
8 m 24 s | 1 m 40 s
C. Albaricoque, s/n
30500. Molina de Segura, Murcia. Spain
